You can use pliers to position, grip, loosen, tighten, and even cut some metal elements. Regardless of whether you don’t have the necessary experience or are a professional, the proper use of pliers can make any task more efficient. Pliers are one of the crucial tools you need in your toolbox, but without the right plier, it’s impossible to accomplish the task. For example, you need pliers with cutting functionalities to achieve the task.

Every pair of pliers tends to have specific functions. Therefore, you need to have pliers that match the requirements of the job at hand. Remember that you can find different types of pliers on the market. In this article, you will learn about the different types of pliers.

Slip-joint Pliers

Pliers can help you do various tasks, including fixing a bicycle, wiring, and many more. Slip-joint pliers can be helpful when it comes to bending or holding round or flat stock. They can also loop a wire, crimp sheet metal, remove cotter pins, cut soft wire nails, and many more.

The key to the versatility of slip-joint pliers is that they have a slip-joint that gives them their name. Like most other pliers, you can operate slip-joint pliers by opening and closing their handles. This causes their jaws to open and close. But slip-joint pliers also have an extra advantage because they feature an adjustable pivot point. This allows the two components of the jaws to shift.

Therefore, you can use slip-joint pliers to grip various items with different thicknesses securely. This includes a single sheet of paper, a half-inch, and many more. Remember that this can depend on the size of the pliers. You can find many slip-joint pliers with at least two or more ways to position the pivot point.

The jaws of slip-joint pliers are serrated and flat. They also have a curve at the jaws back near the pivot. The curved area can hold rounded items, such as rods and pipes. You can find many slip-joint pliers on the market that feature a wire cutter in the neck behind the curved serrations.

Read more: 12 Must-Have Welding Tools – A Complete Welding Tools List For Everyone

Needle-nose Pliers

These pliers are considered for small-scale electricians and have long and tapered jaws. They are usually smaller than pliers for a linesman. The needle-nose pliers are often ideal for working with wires in confined areas, such as electrical boxes, though you can also use them for holding and bending metal fittings. They have tapered jaws and serrated noses on the gripping surface. There is also a side cutter at the device’s throat near the pivot.

It’s worth mentioning that needle-nose pliers are also known as radio pliers, and they can be great for working with washers, small nuts, and other pieces that require correct placement, such as those that are hard to reach with your fingers. You can buy needle-nose pliers that feature bent tips at angles of 90 or 45 degrees to the handles’ line.

Final Words

Pliers are helpful tools for every household. Knowing the 2 common types of pliers can help you choose which pliers you need. I hope you find the right type for your need. If you want to ask any questions, please leave them below! Thank you for visiting Green House Center!